bf0_hal_ezip.h

Header file of EZIP HAL module.

Author: Sifli software development team
Attention

Defines

HAL_EZIP_NON_CONT_MODE_SUPPORTED: Support EZIP Non-Continuous Addressing Mode

HAL_EZIP_MODE_DATA_TYPE_MASK: low 7bit indicates EZIP data type, EZIP, GZIP or LZ4

HAL_EZIP_MODE_ADDR_TYPE_MASK: bit7 indicates EZIP data addressing type

HAL_EZIP_MODE_ADDR_NON_CONT_TYPE: Non-Continuous Addressing Mode

HAL_EZIP_MODE_ADDR_CONT_TYPE: Continuous Data Addressing Mode

EZIP_PARA_OUT_EPIC

EZIP_PARA_OUT_AHB

EZIP_PARA_MOD_EZIP

EZIP_PARA_MOD_GZIP

EZIP_PARA_MOD_LZ4

EZIP_EZIPA_COLOR_GRAYSCALE: grayscale

EZIP_EZIPA_COLOR_RGB888: truecolor RGB888

EZIP_EZIPA_COLOR_INDEXCOLOR: index-color

EZIP_EZIPA_COLOR_GRAYSCALE_ALPHA: grayscale with alpha

EZIP_EZIPA_COLOR_ARGB8888: truecolor with alpha, ARGB8888

EZIP_EZIPA_COLOR_RGB565: RGB565

EZIP_EZIPA_COLOR_ARGB8565: ARGB8565

EZIP_EZIPA_DISPOSE_OP_NONE: The data in output buffer is left as is and used for next rendering

EZIP_EZIPA_DISPOSE_OP_BACKGROUND: The data in output buffer is cleared to fully transparent black before rendering the next frame

EZIP_EZIPA_DISPOSE_OP_PREVIOUS: The data in output buffer is reverted to the previous contents before rendering the next frame

EZIP_EZIPA_BLEND_OP_SOURCE: all color components of the frame, including alpha, overwrite the current contents of the frame’s output buffer region

EZIP_EZIPA_BLEND_OP_OVER: Update data in output buffer by blending based on its alpha value, using simple OVER operation as described in the “Alpha Channel Processing” section of the PNG specification [PNG-1.2]

Typedefs

typedef struct __FLASH_HandleTypeDef *(*EZIP_FlashHandleQueryCbTypeDef)(uint32_t addr)

typedef struct __EZIP_HandleTypeDef EZIP_HandleTypeDef: EZIP handle structure definition

Enums

enum HAL_EZIP_StateTypeDef

HAL EZIP State structures definition.

Values:

enumerator HAL_EZIP_STATE_RESET: EZIP not yet initialized or disabled

enumerator HAL_EZIP_STATE_READY: Peripheral Initialized and ready for use

enumerator HAL_EZIP_STATE_BUSY: An internal process is ongoing

enumerator HAL_EZIP_STATE_TIMEOUT: Timeout state

enumerator HAL_EZIP_STATE_ERROR: EZIP state error

enumerator HAL_EZIP_STATE_SUSPEND: EZIP process is suspended

enum EZIP_WorkModeTypeDef

EZIP Work Mode

Values:

enumerator HAL_EZIP_MODE_EZIP: EZIP continuous mode

enumerator HAL_EZIP_MODE_GZIP: GZIP mode

enumerator HAL_EZIP_MODE_LZ4: LZ4 mode

enumerator HAL_EZIP_MODE_DATA_TYPE_NUM

enumerator HAL_EZIP_MODE_EZIP_NON_CONT: EZIP non-continuous mode

enumerator HAL_EZIP_MODE_GZIP_NON_CONT: GZIP non-continuous mode

enumerator HAL_EZIP_MODE_LZ4_NON_CONT: LZ4 non-continuous mode

enum EZIP_OutputModeTypeDef

EZIP Output Mode

Values:

enumerator HAL_EZIP_OUTPUT_EPIC: output to EPIC

enumerator HAL_EZIP_OUTPUT_AHB: output to AHB bus

Functions

HAL_StatusTypeDef HAL_EZIP_Init(EZIP_HandleTypeDef *ezip)

EZIP Init.

参数:

ezip – [in] EZIP handle

返回值:

HAL – status

HAL_StatusTypeDef HAL_EZIP_IRQHandler(EZIP_HandleTypeDef *ezip)

EZIP IRQ Handler.

参数:

ezip – EZIP handle

返回值:

None –

HAL_StatusTypeDef HAL_EZIP_Decode(EZIP_HandleTypeDef *ezip, EZIP_DecodeConfigTypeDef *config)

Start decoding in polling mode.

参数:

ezip – [in] EZIP handle
config – [in] decoding configuration

返回值:

HAL – status

HAL_StatusTypeDef HAL_EZIP_Decode_IT(EZIP_HandleTypeDef *ezip, EZIP_DecodeConfigTypeDef *config)

Start decoding in interrupt mode.

CpltCallback in handle is used to notify the completion

参数:

ezip – [in] EZIP handle
config – [in] decoding configuration

返回值:

HAL – status

HAL_StatusTypeDef HAL_EZIP_DeInit(EZIP_HandleTypeDef *ezip)

EZIP Deinit.

参数:

ezip – [in] EZIP handle

返回值:

HAL – status

HAL_StatusTypeDef HAL_EZIP_CheckReady(EZIP_HandleTypeDef *ezip)

Check if EZIP is idle.

参数:

ezip – [in] EZIP handle

返回值:

HAL – status

HAL_StatusTypeDef HAL_EZIP_OpenEZIPA(EZIP_HandleTypeDef *ezip, uint8_t *data, EZIP_EZIPAHeaderTypeDef *header, EZIP_EZIPAFrameInfoTypeDef *frame)

HAL_StatusTypeDef HAL_EZIP_CloseEZIPA(EZIP_HandleTypeDef *ezip)

HAL_StatusTypeDef HAL_EZIP_GetNextFrameInfo(EZIP_HandleTypeDef *ezip, EZIP_EZIPAFrameInfoTypeDef *frame)

HAL_StatusTypeDef HAL_EZIP_SuspendEZIPA(EZIP_HandleTypeDef *ezip)

HAL_StatusTypeDef HAL_EZIP_ResumeEZIPA(EZIP_HandleTypeDef *ezip, const uint8_t *data, uint32_t seq_num, uint32_t play_loop_idx)

HAL_StatusTypeDef HAL_EZIP_DecodeFast_Init(EZIP_HandleTypeDef *hezip)

HAL_StatusTypeDef HAL_EZIP_DecodeFast_IT(EZIP_HandleTypeDef *hezip)

struct EZIP_BlockListTypeDef

#include <bf0_hal_ezip.h>

EZIP Block list type for non-continous mode.

Public Members

uint32_t base_addr: block base address

uint32_t block_size: block size in byte

uint32_t block_num: number of blocks

uint32_t block_offset[0]: block offset list, nor: base_addr+offset is absolute address nand: base_addr+offset*block_size is absolute address

struct EZIP_DecodeConfigTypeDef

#include <bf0_hal_ezip.h>

EZIP Decoding Configuration

Public Members

uint8_t *input: input data buffer, must be 32bit aligned, for non continuous work_mode, format is EZIP_BlockListTypeDef

uint8_t *output

output data buffer, must be 32bit aligned

used if output_mode is HAL_EZIP_OUTPUT_AHB

EZIP_WorkModeTypeDef work_mode: work mode

EZIP_OutputModeTypeDef output_mode: output mode

uint16_t start_x

topleft pixel x coordinate of the interested region

starting from 0

uint16_t start_y

topleft pixel y coordinate of the interested region

starting from 0

int16_t width

interested region width

set to -1 if all columns are needed

int16_t height

interested region height

set to -1 if all rows are needed

uint32_t input_data_size: ezip data size in bytes, only valid if data is saved in NAND

struct __EZIP_HandleTypeDef

#include <bf0_hal_ezip.h>

EZIP handle structure definition

Public Members

EZIP_TypeDef *Instance: EZIP register base address.

void (*CpltCallback)(struct __EZIP_HandleTypeDef *ezip): EZIP processing complete callback.

HAL_EZIP_StateTypeDef State: EZIP state.

uint32_t ErrorCode: EZIP error code.

void *user_data: user_data

EZIP_FlashHandleQueryCbTypeDef flash_handle_query_cb: flash handle query callback

EZIP_TypeDef *RamInstance: EZIP register on RAM.

EZIP_TypeDef *HwInstance: Backup of EZIP register base address.

uint8_t RamInstance_used

uint32_t non_cont_block_start_addr: base address of the blocks, internal used valid if EZIP_NON_CONT_MODE is used

struct EZIP_EZIPAHeaderTypeDef

#include <bf0_hal_ezip.h>

EZIPA header

Public Members

uint32_t frame_num: number of frames

uint32_t play_num: loop number, 0 for infinite loop

uint32_t width: image width in pixel, i.e. width of output buffer

uint32_t height: image height in pixel, i.e. height of output buffer

uint8_t bit_depth

uint8_t color_type: color type, EZIPA Color type

struct EZIP_EZIPAFrameInfoTypeDef

Public Members

uint32_t seq_num: frame sequence number, starting from 0

uint16_t width: frame width, unit: pixel

uint16_t height: frame height, unit: pixel

uint16_t x_offset: x(column) position at which to render the current frame in output buffer, unit: pixel, starting from 0,

uint16_t y_offset: y(row) position at which to render the current frame in output buffer, unit: pixel, starting from 0, relative to the topleft

uint16_t delay_num: Frame delay fraction numerator

uint16_t delay_den: Frame delay fraction denominator, 0 means 100 frame_delay=delay_num/delay_den, unit is second

uint8_t dispose_op: disposal oparation type, EZIPA Dispose Op type, specify how the output buffer should be changed at the end of the delay (before rendering the next frame)

uint8_t blend_op: blending operation type, EZIPA Blend Op type specify whether the frame is to be alpha blended into the current output buffer content, or whether it should completely replace its region in the output buffer.