LVGL v8 Lottie Example
Source Path: example/multimedia/lvgl/lvgl_v8_lottie
Warning
Unverified
Introduction
This example is used to test the LVGL V8 Lottie API.
Usage
The following sections provide only essential information. For complete steps on configuring SiFli-SDK and building/running projects, please refer to the SiFli-SDK Quick Start.
Supported Development Boards
This example can run on the following development boards:
eh-lb563
SF32LB52x series
SF32LB56x series
Project Compilation and Download:
The board project is located in the project directory. You can compile projects adapted to different boards by specifying the board parameter:
To compile for HDK 563 development board, execute: scons –board=eh-lb563
Download via JLink: Run .\build_<board_name>\download.bat
For SF32LB52x/SF32LB56x series, an additional uart_download.bat is generated. Execute this script and enter the UART port number to download
The simulator project is located in the simulator directory:
Compile with scons. The SiFli-SDK/msvc_setup.bat file needs to be modified accordingly to match the local MSVC configuration
You can also generate an MSVC project using scons –target=vs2017 and compile with Visual Studio
Note
If you are not using VS2017 (e.g., using VS2022), you will be prompted to upgrade the MSVC SDK when loading the project. After upgrading, it can be used normally.
Troubleshooting
If you have any technical questions, please submit an issue on GitHub.